| 引用本文： |
-
靳晓珠,杨仲平,徐华,陈祝炳.氧氮分析影响因素探讨[J].广西科学院学报,2006,22(S1):499-501. [点击复制]
- JIN Xiao-zhu,YANG Zhong-ping,XU Hua,CHEN Zhu-bing.Discussion on Influence Factors of Nitrogen and Oxygen Determination[J].Journal of Guangxi Academy of Sciences,2006,22(S1):499-501. [点击复制]
|
|
| 摘要: |
| 分析LecoTC-400氧氮分析仪应用过程中影响氧氮分析结果准确性的因素,认为使用该仪器进行分析测试时,首先必须保证所用试剂及器材(氦气、高氯酸镁、碱石棉、助熔剂、石墨坩锅)的有效性,其次要根据具体情况,选择适宜的标样进行校正,确定最佳分析功率、分析时间、助熔剂及称样量,以保证分析结果的准确性。 |
| 关键词: 氧氮分析 标样校正 准确度 |
| DOI： |
| 投稿时间：2006-08-10 |
| 基金项目: |
|
| Discussion on Influence Factors of Nitrogen and Oxygen Determination |
|
JIN Xiao-zhu, YANG Zhong-ping, XU Hua, CHEN Zhu-bing
|
| (Guilin Institute of Geology for Mineral Resources, Guilin, Guangxi, 541004, China) |
| Abstract: |
| The influence factors in measuring nitrogen and oxygen by using TC400 nitrogen/oxygen determinator were discussed in this paper.In order to obtain high accuracy,all agents and materials including helium,magnesium perchlorate,soda asbestos,flux and graphite crucibles must be checked before using,and should be kept in activity conditions during determination.The suitable standard samples must be used for a good calibration curve.Besides,the analyzing power,analysis time,flux and sample's mass are important for the experiment. |
| Key words: standard sample calibration nitrogen/oxygen determination accuracy |
