引用本文
  • 邓志恒,陆春阳.钢筋砼连续叠合梁受弯性能及设计方法研究[J].广西科学,2000,7(3):161-164.    [点击复制]
  • Deng Zhiheng,Lu Chunyang.Bending Behavior and Design Methods of Continuous Laminated Reinforced Concrete Beams[J].Guangxi Sciences,2000,7(3):161-164.   [点击复制]
【打印本页】 【在线阅读全文】【下载PDF全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 322次   下载 490 本文二维码信息
码上扫一扫!
钢筋砼连续叠合梁受弯性能及设计方法研究
邓志恒, 陆春阳
0
(广西大学土木建筑工程学院, 南宁市西乡塘路10号 530004)
摘要:
通过6根二次受力连续叠合梁和1根一次受力叠合梁及1根整浇梁的试验,研究二次受力叠合梁受力性能及内力重分布规律,并根据试验结果提出设计方法。
关键词:  二次受力  叠合梁  内力重分布  设计方法
DOI:
投稿时间:1999-12-14修订日期:2000-03-15
基金项目:广西教育厅资助项目:桂教科字(1998)第1-9号。
Bending Behavior and Design Methods of Continuous Laminated Reinforced Concrete Beams
Deng Zhiheng, Lu Chunyang
(College of Civil Engi., Guangxi Univ., 10 Xixiangtanglu, Nanning, Guangxi, 530004, China)
Abstract:
By experimenting upon six secondary loaded continuous laminated beams and one single loaded laminated beam and one integral casting beam, bending behavior of secondary loaded laminated beams and the monment redistribution regularity were studied. Then design methods were put forward based on test results.
Key words:  secondary loaded  laminated beam  the moment redistribution  design method

用微信扫一扫

用微信扫一扫