| 引用本文： |
-
卢昱江,孔令一,邓芊芊,黄礼琳,罗志荣,高英俊.微裂纹起裂扩展机理的晶体相场模拟[J].广西科学院学报,2017,33(4):240-245. [点击复制]
- LU Yujiang,KONG Lingyi,DENG Qianqian,HUANG Lilin,LUO Zhirong,GAO Yingjun.Phase field crystal Simulation of Nucleation and Propagation of Micro-cracks[J].Journal of Guangxi Academy of Sciences,2017,33(4):240-245. [点击复制]
|
|
| |
|
|
| 本文已被：浏览 574次 下载 695次 |
码上扫一扫！ |
| 微裂纹起裂扩展机理的晶体相场模拟 |
|
卢昱江1, 孔令一1, 邓芊芊1, 黄礼琳1,2, 罗志荣1,2, 高英俊1
|
|
|
| (1.广西大学物理科学与工程技术学院, 广西高校新能源重点实验室, 广西南宁 530004;2.玉林师范学院物理科学与工程技术学院, 广西玉林 537000) |
|
| 摘要: |
| [目的]研究初始晶向倾角为15°的样品分别在垂直和水平方向上,单轴拉应变作用下的纳观尺度裂口发射位错与裂纹扩展行为,了解韧性裂纹的生长特征和扩展规律,揭示纳米级韧性裂纹扩展机理及其对材料断裂的影响。[方法]采用晶体相场(PFC)方法观察15°晶向倾角下位错发射与裂纹扩展演化图及其对应的应力曲线图。[结果]垂直和水平不同方向拉应变作用下裂纹扩展方向不同,但裂纹都是韧性断裂模式扩展;当单轴拉应变作用达到临界值时,样品裂口开始发射滑移位错,随着外应力的增大,位错在滑移过程中留下一系列空位,空位长大连通形成裂纹并与主裂口相连,裂纹随着位错运动而扩展。[结论]在韧性裂纹扩展中,位错发射的运动对韧性裂纹扩展演化有重要影响。 |
| 关键词: 单轴拉应变 微裂纹 位错发射 晶体相场 |
| DOI：10.13657/j.cnki.gxkxyxb.20171127.001 |
| 投稿时间：2017-07-15 |
| 基金项目:国家自然科学基金项目(51161003,51561031)和广西自然科学基金重点项目(2012GXNSFDA053001)资助。 |
|
| Phase field crystal Simulation of Nucleation and Propagation of Micro-cracks |
|
LU Yujiang1, KONG Lingyi1, DENG Qianqian1, HUANG Lilin1,2, LUO Zhirong1,2, GAO Yingjun1
|
| (1.Guangxi Key Laboratory of Novel Energy Materials of College and University, College of Physics Science and Engineering, Guangxi University, Nanning, Guangxi, 530004, China;2.Institute of Physics Science and Engineering Technology, Yulin Normal University, Yulin, Guangxi, 537000, China) |
| Abstract: |
| [Objective] The samples with 15° initial crystal orientations and crack propagation behavior of nano scale under uniaxial tensile strain are studied respectively in vertical and horizontal directions to understand the growth characteristics and propagation law of crack,and to reveal the mechanism of nano scale crack propagation and its effect on material fracture.[Methods] The phase field crystal (PFC) method are used to observe the dislocation emission,the crack propagation evolution and its corresponding stress curve of 15° crystal orientations under uniaxial tensile strain in the different direction.[Results] The cracks are both propagation of ductile fracture mode in vertical and horizontal directions under uniaxial tensile strain.When the uniaxial tensile strain reaches the critical value,the sample begins to emit slip dislocations,and as the external stress increases,in the process of slipping the dislocations leave a series of vacancies,which grow up and form cracks,and then connect to the main crack.The crack expands with the dislocation movement.[Conclusion] In ductile crack propagation,the movement of dislocation emission has an important influence on the evolution of ductile crack propagation. |
| Key words: uniaxial tensile strain micro-cracks dislocation emission phase field crystal |
|
|
|
|
|
