引用本文
  • 贺翔波.基于PLC技术的机场登机桥侧倾保护装置设计[J].广西科学院学报,2006,22(4):392-394.    [点击复制]
  • HE Xiang-bo.Design of A Slant Protection Device of Airport Boarding Bridge Based on PLC Technology[J].Journal of Guangxi Academy of Sciences,2006,22(4):392-394.   [点击复制]
【打印本页】 【在线阅读全文】【下载PDF全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 350次   下载 366 本文二维码信息
码上扫一扫!
基于PLC技术的机场登机桥侧倾保护装置设计
贺翔波
0
(广西桂林两江国际机场公司, 广西桂林 541106)
摘要:
针对民航机场机械式登机桥设备侧倾的安全隐患,利用PLC可编程控制器技术设计一个登机桥侧倾保护装置。该装置的模拟测试结果是,当左右两套升降机构高度差在5cm时,侧倾保护装置动作,发出报警信号并强行停机,两套升降机构允许的安全高度差为10cm,完全满足侧倾保护的需要。
关键词:  机场登机桥  侧倾保护  PLC
DOI:
投稿时间:2006-09-15
基金项目:
Design of A Slant Protection Device of Airport Boarding Bridge Based on PLC Technology
HE Xiang-bo
(Guangxi Guilin Liangjiang International Airport Company, Guilin, Guangxi, 541106, China)
Abstract:
The Programmable Logic Controller(PLC) technology is used to make a protection device in order to avoid slant happening in mechanical boarding bridge.With this device on,when the altitude variance between left lift and right lift comes to be 5cm,the protection device will be touched off,with the alarm being on,and the boarding bridge is shut down automatically.The safety altitude variance of two lifts is 10cm,and can meet the needs of slant protection completely.
Key words:  boarding bridge  slant protection  PLC

用微信扫一扫

用微信扫一扫