| 摘要: |
| 根据剪节理面上的擦痕与主应力轴的空间几何关系,由所测得的剪节理组的产状、剪节理面上的擦痕的方位,用定量求解的方法进行节理配套,找出与之配套的另一组剪节理。用计算机C语言设计出程序,借助微机自动完成其复杂的分析处理及配套过程。 |
| 关键词: 擦痕 剪节理 C程序 |
| DOI： |
| 投稿时间：2002-02-05修订日期：2002-07-26 |
| 基金项目: |
|
| Mating of Joints and Data Automatically Processing with Slickensides |
|
Zhang Minghua1, Wang Zengke2
|
| (1.Dept. of Resource and Env. Eng., Guilin Institute of Tech., Guilin, 541004;2.Dexing Copper Ore of Jiangxi, Dexing, Jiangxi, 334200) |
| Abstract: |
| According to the geometric relations between main stress axies and slickensides on the plane of shear joints,joints can be matched quantitatively with attitudes of shear joint groups and orientations of slickensides on the plane of shear joint.The another joint group matching the current group can be found.The complicated analysis and match are completed automatically by means of microcomputer with C program. |
| Key words: slickenside shear joint C program |
