引用本文
  • 王研,李翠翠,杨曦林,程立春,周丽娜.增强植物光合作用复合型稀土转光材料的制备及发光性能[J].广西科学,2024,31(3):593-603.    [点击复制]
  • WANG Yan,LI Cuicui,YANG Xilin,CHENG Lichun,ZHOU Lina.Preparation and Luminescence Properties of Composite Rare Earth Light Conversion Materials for Enhancing Plant Photosynthesis[J].Guangxi Sciences,2024,31(3):593-603.   [点击复制]
【打印本页】 【在线阅读全文】【下载PDF全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 70次   下载 93 本文二维码信息
码上扫一扫!
增强植物光合作用复合型稀土转光材料的制备及发光性能
王研1, 李翠翠1, 杨曦林2, 程立春3, 周丽娜4
0
(1.广西农业职业技术大学, 广西 南宁 530007;2.广西壮族自治区农业农村厅, 广西 南宁 530022;3.山东东大塑业有限公司, 山东 聊城 252000;4.吉林农业大学, 吉林 长春 130000)
摘要:
为提升可见光中红蓝光比例,灵活匹配植物对不同光质的需求,增强植物光合作用,本研究采用适合工业生产的高温固相法制备Y2O3:Eu3+、BaMgAl10O17:Eu2+、CaSrAl2SiO7:Eu3+稀土转光材料,将其混合制备成稀土转光材料XT-SZ,并分析不同配比XT-SZ的发光性能。结果发现,按质量比1∶1∶1、2∶1∶1、2∶2∶1、4∶2∶1、6∶4∶1这5种比例制备的XT-SZ保持了主要组分的物相结构,未出现新的衍射峰,表明混合过程对物相结构无显著影响。激发光谱与发射光谱分析结果表明,上述5种比例制备的XT-SZ具有相似的发光特性,但可以通过优化组分比例来进一步提升其发光性能。该材料的主发射峰主要位于约450 nm(蓝光区)和620 nm(红光区)两处,XT-SZ主发射峰的红、蓝光相对强度比值与Y2O3:Eu3+配比,整体呈现正相关性,Y2O3:Eu3+、CaSrAl2SiO7:Eu3+、BaMgAl10O17:Eu2+的配比分别为2∶2∶1和6∶4∶1时,红、蓝光相对强度比值增幅显著。在自然光原有红蓝光不变的基础上,XT-SZ可同步减少对植物生长有害的紫外光和无效的绿光,并将两者同时转化为植物生长所需的红、蓝光,提升可促进植物光合作用的光合光量子通量密度,并可通过调整配比,灵活实现XT-SZ的红、蓝光相对光强,以满足植物生长对光质的不同需求。
关键词:  光合作用  稀土  转光材料  发光性能
DOI:10.13656/j.cnki.gxkx.20240910.019
投稿时间:2024-06-06修订日期:2024-07-24
基金项目:广西高校中青年教师科研基础能力提升项目(2024KY1246),广西农业职业技术大学科研项目(XKJ2306)资助
Preparation and Luminescence Properties of Composite Rare Earth Light Conversion Materials for Enhancing Plant Photosynthesis
WANG Yan1, LI Cuicui1, YANG Xilin2, CHENG Lichun3, ZHOU Lina4
(1.Guangxi Vocational University of Agriculture, Nanning, Guangxi, 530007, China;2.Department of Agriculture and Rural Affairs of Guangxi Zhuang Autonomous Region, Nanning, Guangxi, 530022, China;3.Shandong Dongda Plastic Co, Ltd, Liaocheng, Shandong, 252000, China;4.Jilin Agricultural University, Changchun, Jilin, 130000, China)
Abstract:
To improve the ratio of red to blue light in visible light,flexibly match the needs of plants for different light quality,and enhance plant photosynthesis,this study used a high-temperature solid-phase method suitable for industrial production to prepare Y2O3:Eu3+,BaMgAl10O17:Eu2+,and CaSrAl2SiO7:Eu3+rare earth light conversion materials,which were then mixed in different ratios to prepare XT-SZ light conversion materials.The luminescence properties of XT-SZ with different ratios were analyzed.The results showed that XT-SZ light conversion materials prepared in five ratios of 1∶1∶1,2∶1∶1,2∶2∶1,4∶2∶1,and 6∶4∶1 maintained the phase structure of the main components and did not show any new diffraction peaks,indicating that the mixing process had no significant effect on the phase structure.The excitation and emission spectra indicated that the XT-SZ materials prepared with the above five ratios had similar luminescence properties,while their luminescence performance could be further improved by optimizing the composition ratio.The main emission peaks of the XT-SZ materials were mainly located at about 450 nm (blue region) and 620 nm (red region).The relative intensity ratio of red to blue light in the main emission peak of XT-SZ materials was positively correlated with the Y2O3:Eu3+ ratio.When Y2O3:Eu3+,CaSrAl2SiO7:Eu3+,and BaMgAl10O17:Eu2+ were mixed in the ratios of 2∶2∶1 and 6∶4∶1,respectively,the relative intensity ratio of red to blue light increased significantly.On the basis of maintaining the original red and blue light of natural light,XT-SZ rare earth light conversion materials could simultaneously reduce harmful ultraviolet light and ineffective green light for plant growth and convert them into the red and blue light required for plant growth,thus improving the photosynthetic quantum flux density that can promote plant photosynthesis.By adjustment of the ratio,the relative light intensity of red and blue light in XT-SZ can be flexibly achieved to meet the different needs of plant growth for light quality.
Key words:  photosynthesis  rare earth  light conversion material  luminescence properties

用微信扫一扫

用微信扫一扫