引用本文
  • 刘益祥.岩滩水电站机组主要参数的选择及水轮机模型验收试验[J].广西科学,1994,1(2):65-69.    [点击复制]
  • Liu Yixiang.Main Parameter Selection of Unit & Model Acceptance Test on Turbine of Yantan hydropower Station[J].Guangxi Sciences,1994,1(2):65-69.   [点击复制]
【打印本页】 【在线阅读全文】【下载PDF全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 373次   下载 307 本文二维码信息
码上扫一扫!
岩滩水电站机组主要参数的选择及水轮机模型验收试验
刘益祥
0
(广西电力工业勘察设计院, 南宁市建政路10号 530023)
摘要:
岩滩水电站装机4台,装机容量1210MW.水轮机为混流式。额定水头59.4m,转轮直径D1为8m,是我国目前尺寸最大的混流式水轮机。岩滩水电站水轮机性能采用模型验收试验方式验收.其全模拟模型最高效率达到92%。
关键词:  岩滩水电站  混流式水轮机  参数选择  模型验收试验
DOI:
投稿时间:1994-04-11
基金项目:
Main Parameter Selection of Unit & Model Acceptance Test on Turbine of Yantan hydropower Station
Liu Yixiang
(Guangxi Electric Power Industry Investigation & Design Institute, 10 Jianzheng Road, Nanning, Guangxi, 530023)
Abstract:
Four turbine-generator units are be installed at Yantan hydropower station.Total power of the station is 1210 MW. The turbine is Francis type,rated head 59.4 meters and runner nominal diameter 8 meters,it is maximal dimension Francis turbine in China at present.Model acceptance test is applied to accept Yantan turbine performances.The model efficiency maximum is 92 percent in the completion of similar prototype.
Key words:  Yantan hydropower station  Francis turbine  parameter selection  model acceptance test

用微信扫一扫

用微信扫一扫